Laser Paint And Rust Removal For Metal Aluminium Stainless Carbon Steel

  • Leave a Review

  • Laser Paint And Rust Removal For Metal Aluminium Stainless Carbon Steel

    Precio : Gratis

    Publicado por : lisa

    Publicado en : 16-09-22

    Ubicación : London

    Visitas : 33

    Sitio web : https://www.igolden-cnc.com/laser-paint-and-rust-removal-for-metal-aluminium-stainless-carbon-steel/



    Laser Paint And Rust Removal For Metal Aluminium Stainless Carbon Steel

    The world’s first laser was developed in 1960 by American scientist Professor Theodore Harold Maiman using ruby, which opened the door for lasers to benefit mankind. The next time, lasers used in various fields were born one after another. The promotion of laser technology has enabled the rapid development of science and technology in the fields of medical treatment, equipment manufacturing, precision measurement, and remanufacturing engineering, and accelerated the pace of social progress.

    laser paint and rust removal is the latest high-tech product. Easy to install, operate, easy to achieving automation. Plug in power, turn on and start cleaning – without chemicals, media, dust, water.

    Now the market is flooded with various laser cleaning equipment, but many of them are non-professional laser cleaning equipment, which is mainly reflected in the hand-held cleaning head.

    Laser Paint And Rust Removal For Metal Parameter:

    Where can we find the application of metal laser paint and rust removalin the industrial field?

    laser paint and rust removal are often used in industrial manufacturing. In order to ensure the quality of the product, it is necessary to clean up the dirt, grease, dust, rust and other pollutants on the surface of the product during the production process. Below we will introduce the application of industrial fiber laser cleaning machine in various industries in detail.

    1. Laser cleaning in the electronics industry
    The electronics industry needs to use a laser cleaning machine to remove oxides. Before soldering the circuit board, the component pins must be thoroughly deoxidized to ensure the effect of electrical contact, and the pins must not be damaged during the decontamination process. Laser cleaning can meet the requirements of use, and the efficiency is very high, and only one pin needs to be irradiated by laser once.

    2. Applications in brazing and pre-welding
    2000w For Rust Removal help to remove ferrous and non-ferrous metals, lubricants and other contaminants from metal and aluminum surfaces and prepare them for high-quality welding. It also ensures smooth, non-porous brazed seams.

    3. Clean the mold
    Since the 2000w For Rust Removal can be connected with the optical fiber, it can clean the dead corners of the mold or the parts that are not easy to clean, which is easy to use and saves production time and cost.

    How It Works
    Laser cleaning uses a machine that aims a laser pulse at high power onto the rusty surface of a material. The laser energy is absorbed by the organic material lying on the surface of the substrate while the non-organic substrate remains untouched.

    The laser beam is passed over the surface until the preferred depth and area have been completely rid of the rust. At low flux, the laser energy from the beam ablates the surface while vaporizing the rust. At high flux, the laser energy converts the rust or other unwanted material to plasma. Both low and high flux get the job done, but their use depends on the type of surface in question.

    There are two distinct laser cleaning processes; coating removal and surface decontamination. The former is characterized by removing a layer of unwanted material from the surface of a substrate. It is most effective when the physical and chemical composition of the layer differs from the substrate. Such include insulation, primers, corrosion preventive coatings, rubber or paint. Normally, the low flux laser beam is used for this. The latter involves removing the entire upper layer of the substrate and requires high flux laser beams.


    The Advantage of laser paint and rust removal
    It’s a non-contact, non-abrasive process. Home remedies are messy and unhealthy. Scrubbing off rusted surfaces exposes you to impurities which could lead to respiratory complications. Laser cleaning, on the other hand, relies on the laser beam to ablate the surface. There is no physical contact between you and the rust.
    No use of chemicals. Rust remover chemicals can get the job done, but the health implications on their use outweigh their benefit. Such chemicals are not only harsh and abrasive but also emit intense fumes. You will need to wear protective gear such as a respirator, goggles and rubber gloves before using them. However, laser cleaning does not rely on any chemical application. It is the better choice as it does not put your health at risk.
    No secondary waste is produced. Scrubbing off rust from surfaces only disintegrates the rusty particles from the substrate, leaving you with a toxic lump of rust dust at the end of the process. Electrolysis leaves the rust particles floating in the water, which you later have to dispose of. In comparison, laser cleaning is a cleaner process as the rust particles are either vaporized or turned into plasma, leaving no evidence of waste.
    High precision. The focused laser beams have an extremely precise focal edge, allowing you to ablate rust from tough spots that would otherwise be harder to clean with other apparatus. Such include the rust that develops around bolts and rails. Additionally, the high precision allows you to focus the laser beam repeatedly over a specific area to achieve the required depth and result.
    It’s effective on all surfaces. Unlike other rust removal procedures, laser cleaning works on all surfaces that are prone to rusting, including stones, concrete, iron, aluminum (bauxite) or copper.
    It does not degrade the substrate. Scrubbing rusted surfaces significantly degrades the substrate due to friction. Rust removing chemicals, on the other hand, are harsh and corrosive, causing wear and tear that could spoil delicate metals or even weaken their robustness. Laser cleaning in comparison ablates the surface while leaving the substrate untouched.
    It is a long-term solution. A laser paint and rust removal will serve you longer than any scrubber or rust removing chemical will. The laser does not suffer any wear or tear, and thus can be used and reused over its lifetime.

      Anuncios relacionados

     
    Reportar este anuncio