China Factory 50W-500W hand held laser rust remover-IGOLDENCNC

  • Leave a Review

  • China Factory 50W-500W hand held laser rust remover-IGOLDENCNC

    Precio : €50.000,00

    Publicado por : lisa

    Publicado en : 19-04-22

    Ubicación : A Coruña

    Visitas : 11

    China Factory 50W-500W hand held laser rust remover-IGOLDENCNC

    Fiber laser cleaning Machine are finding great applications in the industry today. It is often seen that rust, grease, and other such substrates form a layer with time over metals and non-metallic products.  And with increasing time the laser rust cleaning and metallic parts cleaning technologies have evolved.  bw5f28sd

    Features of  Laser rust removal machine:
    Customer selected depending on the thickness of the material to de-rust. Consult our application engineer to learn proper selection of fiber laser source.
    Materials mostly used for laser cleaning are Aluminium (Anodized/Polished/Cast), Stainless Steel/ Mild Steel, Titanium, Copper, Brass, Nickel, Galvanized Metals, Multi-Coated Materials, Painted Metal Alloys, Plastics, Polypropylene/Polycarbonate, Cast Iron and Chrome, Chrome, Carbide, Rubber and PVC.

    The Advantage of Laser cleaning and rust removal

    It’s a non-contact, non-abrasive process. Home remedies are messy and unhealthy. Scrubbing off rusted surfaces exposes you to impurities which could lead to respiratory complications. Laser cleaning, on the other hand, relies on the laser beam to ablate the surface. There is no physical contact between you and the rust.
    No use of chemicals. Rust remover chemicals can get the job done, but the health implications on their use outweigh their benefit. Such chemicals are not only harsh and abrasive but also emit intense fumes. You will need to wear protective gear such as a respirator, goggles and rubber gloves before using them. However, laser cleaning does not rely on any chemical application. It is the better choice as it does not put your health at risk.
    No secondary waste is produced. Scrubbing off rust from surfaces only disintegrates the rusty particles from the substrate, leaving you with a toxic lump of rust dust at the end of the process. Electrolysis leaves the rust particles floating in the water, which you later have to dispose of. In comparison, laser cleaning is a cleaner process as the rust particles are either vaporized or turned into plasma, leaving no evidence of waste.
    High precision. The focused laser beams have an extremely precise focal edge, allowing you to ablate rust from tough spots that would otherwise be harder to clean with other apparatus. Such include the rust that develops around bolts and rails. Additionally, the high precision allows you to focus the laser beam repeatedly over a specific area to achieve the required depth and result.
    It’s effective on all surfaces. Unlike other rust removal procedures, laser cleaning works on all surfaces that are prone to rusting, including stones, concrete, iron, aluminum (bauxite) or copper.
    It does not degrade the substrate. Scrubbing rusted surfaces significantly degrades the substrate due to friction. Rust removing chemicals, on the other hand, are harsh and corrosive, causing wear and tear that could spoil delicate metals or even weaken their robustness. Laser cleaning in comparison ablates the surface while leaving the substrate untouched.
    It is a long-term solution. A laser cleaning machine will serve you longer than any scrubber or rust removing chemical will. The laser does not suffer any wear or tear, and thus can be used and reused over its lifetime.

    7. Cleaning of rubber mold residues
    Machine Parameters

    Laser Wavelength 1064nm
    Laser Power 1000W/1500W/2000W
    Fiber Length 8-10m(15m Optioned)
    Scanning Width 10-80mm
    Voltage 220V,50/60HZ
    Cooling Method Water-cooling
    Working Temperature 5-45℃
    This kind of portable laser rust remover is widely applied in mold industry, automobile manufacturing,shipbuilding industry, food processing,sewage treatment, rubber tires, petrochemical and other industries.

    Application Scope: this laser rust removal machine can quickly remove paint and remove metal or glass surface coating, rust, and a variety of oxides, grease, resin, glue, dust, stains, production residues, rough metal surface. The portable laser rust remover can also remove the greasy dirt, Post-weld oxide and dispose of the residue before welding. Mould cleaning,such as tire mould, electronic mould,food mould. Greasy dirt of the precision parts can be removed after production and processing. All in all, this portable laser rust remover can quick cleaning of nuclear component maintenance.

    Fecha 19-04-22

      Anuncios relacionados

    Reportar este anuncio